BW Technologies MicroClip XT Dokumentacja Pobierz pdf (Strona 57)

GasAlertMicroClip XT

Technical Reference Guide

Datalogs

The detector records various information that can be compiled to create

a report. The detector is capable of storing 16 hours of information

(when recording a datalog every 15 seconds). When the memory is full,

the detector replaces the oldest datalogs with the most recent datalogs.

To change the datalog interval, refer to Datalog Interval

Event Logs

The detector records the 10 most recent gas alarm events. The follow-

ing information is recorded:

• Serial number of the detector

• Start time of alarm

• Type, level and duration of alarm

• Peak exposure level (ppm or %)

• Status of the sensor

Downloading Datalogs and Event Logs

The datalog and event log files can only be downloaded to a PC using

an IR Link or the MicroDock II base station. Refer to the Fleet Manager

II Operator’s Manual or MicroDock II User Manual.

Software Requirements

To create spreadsheet reports of event logs, datalogs, and bump and

calibration results, the following software applications are required:

• Fleet Manager II, and

• Microsoft Excel.

Maintenance

To maintain the detector in good operating condition, perform the follow-

ing basic maintenance as required.

• Calibrate, bump check, and inspect the detector at regular inter-

vals.

• Maintain an operations log of all maintenance, bump checks, cali-

brations, and alarm events.

• Clean the exterior with a soft damp cloth. Do not use solvents,

soaps, or polishes.

• Do not immerse the detector in liquids.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 73 74

Brak uwag

BW Technologies MicroClip XT Dokumentacja Strona 57