BW Technologies MicroClip XT Instrukcja Obsługi Pobierz pdf (Strona 16)

GasAlertMicroClip

Operator’s Manual

Alarm Display Alarm Display

Sensor Alarm

• During startup Error [sensor name]

displays

• During normal operation Err displays

Confidence Beep and IntelliFlash

• One beep and flash every second

Note: Confidence Beep and

IntelliFlash automatically

deactivate during low battery

alarm, self-test fail, calibration fail,

bump test fail, or an alarm event.

Low Battery Alarm

• Sequence of 10 rapid sirens and

alternating flashes with 7 seconds of

silence in between (continues for

15 minutes)

• and

flash,

LOW BAT

displays, and the vibrator alarm activates

• After 15 minutes of the Low Battery

alarm, the Automatic Shutdown Alarm

sequence begins

• OFF displays before deactivating

Automatic Shutdown Alarm

• Sequence of 10 rapid sirens and

alternating flashes with 1 second of

silence in between (sequence reactivates

seven times)

• LOW BAT and L display, and

vibrator alarm activates

• OFF displays before deactivating

Note: Alarms can be set to latching or non-latching. To enable/disable

latching, select/deselect Latching Alarms in Fleet Manager II. Local

regulations may require a latching alarm.

If Low Alarm Acknowledge is enabled and a low alarm occurs, press

C to disable the audible alarm. The visual and vibrator alarms remain

activated. If the alarm escalates to a high, STEL, or TWA alarm, the

audible alarm reactivates.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Brak uwag

BW Technologies MicroClip XT Instrukcja Obsługi Strona 16